Compact
Universal Mount C.B. & C.B./Intercom
All CycleComm Products Can Be Purchased
Online By
Clicking Here.
The
best value in motorcycle communications. C.B. Transceiver,
Passenger to Driver Intercom and Stereo Interface all in one
compact unit.
|
 |
SPECIAL FEATURES
* 40 Channel C.B.
Transceiver can include Intercom and stereo override
* LED Display for easy reading
* Squelch Control
* No Fairing needed for installation
* Can be used with all standard 5 Pin Din Helmet
Systems
* Small Size - 4-1/2" x 1-1/4" x 8"
* Adaptable to Snowmobiles and ATVs
* Quick Disconnect Power Cord and PTT Cable
* Suction Cup or "U" Bracket Mounting
* Optional Hand Held Microphone
* Optional Driver to Passenger Intercom
* Optional Built-in Stereo Interface Relay |
Although this
unit may appear to be a conventional automotive C.B., it is
far more sophisticated than it appears. We carefully
manufacture this unit adding the necessary special circuits
that enable our units to out perform and out last any other
C.B. Unlike our competitors we put all Intercom, PTT and
stereo override circuits within the shielded confines of the
C.B.’s metal case. This advanced method provides for lower
cost, fewer wires and cables and easier installation. As an
example, our model CC-1575 contains not only a full
40 channel C.B. transceiver, but a built-in intercom and
stereo override relay. The reasonable price of this model is
only $459.00 as compared to our competitors three piece
arrangement costing you $967.00.
This powerful, yet small,
C.B. Transceiver and C.B. with Intercom are extremely
versatile and have been designed for quick installation and
removal. It can be mounted with four rugged suction cups on
a smooth surface or you may use the quick release "U"
bracket which is supplied. Cases are available for mounting
on sissy bars and handle bars. See accessory for more
information. The Push-To-Talk switch, which is supplied,
mounts on the handlebar for safety and convenience. The C.B.
can be mounted on motorcycles, ATVs, snowmobiles and other
vehicles which require semi-permanent mounting features. The
powerful 4 watt transmitter provides good communications at
all speeds with ranges up to five miles, depending on the
antenna and the terrain. See the Antenna Kits and
Accessories section for more information.
Click Here
For More Information On This Model
All C.B.s require helmet
systems and a C.B. antenna. However, our C.B. is designed to
work with all standard 5 pin din headsets. Some of the J&M
headsets that use the large rubber ring on the 5 pin din
connector will require the purchase of an adapter, our
number JM-138 for $15.00. This is only required for the
drivers headset. A noise filter may be needed for some
installations. If required, use our Model NF-721 for
eliminating most alternator induced noises.
Choose from the models below the unit which will suit your
particular need.
All CycleComm Products Can Be Purchased
Online By
Clicking Here.
Model
CC-1500 40 Channel
C.B. Transceiver with PTT Switch.
$239.00
Competitors
unit is priced at $335.00Model
CC-1550 40 Channel C.B. Transceiver with
Stereo Override Relay $329.00
Competition requires the
purchase of three separate units at a cost of $770.00
Model
CC-1570 ....40
Channel C.B. with Passenger to Driver Intercom
$389.00
Competition doesn’t
offer this unit. Model CC-1575 40
Channel C.B. with Intercom and Stereo Override Relay $459.00
 |
Here
is what this unit looks like when mounted in a Gold
Wing 1200.
All Prices And
Availability Are Subject To Change Without Notice.
All CycleComm Products Can Be
Purchased Online By
Clicking Here. |